STIP-scan

Detection of zinc content, the range is 0.05mg/L-15mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Xylenol Orange Spectrophotometric method, spec-trophotometry" standard.

Detect the content of phosphoric acid salt, the range is 0.02mg/L-20mg/L (segmented determination), without digestion, using digestion Colorimetric integrated detection, in line with HJ 670-2013 standard.

Equipped with British original electrodes, based on Android Operating system, 2 to 5 point calibrated, setting menu can customize 12 function parameters, Measurement accuracy: 1% F.S.

Measure the relative and absolute mV value of the sample, based on the Android Operating system, 1 point offset calibrated, the setting menu can customize 10 function parameters, Measurement accuracy 0.2mV.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Simultaneously detect COD, ammonia nitrogen parameters, digestion Colorimetric integrated detection, with Pipette and digestion instrument, imported cold Light source, can choose standard measurement or Continuous Measurement mode.

Detection of manganese content, the range is 0.04mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11906-89 standard.

The HI98195/40 multiparameter Water Quality Analyzer is equipped with a 40-meter electrode for extremely deep water monitoring. With IP67 waterproof performance, it can comprehensively measure pH, conductivity, TDS and other 10 water quality indicators. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term and large-scale water quality monitoring in the most severe environments.

20 meters long, 7 items of important water quality indicators rapid simultaneous measurement, multiparameter integrated electrode design, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, suitable for pipeline or deep well measurement.

The HI98195/20 multiparameter Water Quality Analyzer is equipped with a 20-meter electrode, suitable for deep water and long-distance monitoring. With IP67 waterproof design, it can accurately measure 10 water quality parameters such as pH, conductivity, TDS, etc. Support 45,000 Data storage, USB data transmission and GLP management to meet the needs of multi-scene applications, suitable for long-term monitoring.

Detection of nickel content, the range is 0.1mg/L-4mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11910-89 standard.

Digestion Colorimetric integrated tube detection, detection of COD concentration value, range 5mg/L-10000mg/L (segmented), Sensitivity up to 0.001mg/L, with digestion instrument and pipette gun.

Detection of nitrate nitrogen content, the range is 0.5mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Water Quality, Chromotropic Acid Spectrophotometry".

Laboratory, hanging and portable three use modes, ultra-thin and lightweight Appearance design, 5.5-inch large-screen LCD display, touch key operation, unique data type intelligent electrode, automatic identification, fault diagnosis.

DO10 portable polarographic Dissolved Oxygen Meter, support temperature automatic compensation, pressure automatic compensation, salinity manual compensation, support full oxygen calibration, zero oxygen calibration.

Measurement range 0.0 to 19.9 mg/L (ppm), resolution 0.1mg/L (ppm), Measurement accuracy +/- 1.5% F.S., suitable for the determination of different water quality and wastewater dissolved oxygen in various industries.

The HI98195/10 multiparameter Water Quality Analyzer is equipped with a 10-meter electrode, suitable for deep water quality monitoring. With IP67 waterproof performance, it can quickly measure 10 water quality indicators such as pH, ORP, conductivity, etc. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term data collection and analysis in complex wild environments.

Multiparameter water quality measurement, designed for field measurements in harsh environments. The instrument supports simultaneous measurement of pH, ORP, dissolved oxygen, atmospheric pressure and temperature five key water quality indicators, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, ensuring Reliability in complex environments such as pipelines or deep wells.

40 meters of wire, IP67 waterproof and anti-skid body and IP68 waterproof electrode, support up to seven water quality indicators of rapid simultaneous measurement, can install pH (ORP), EC electrode

DOPRO10 Portable Optical inspection Dissolved Oxygen Meter, measurement does not consume dissolved oxygen, stable measurement, supporting stainless steel protective sedimentation sleeve, POM shell, durable.

Measurement range residual chlorine/total chlorine: 0.00~3.00mg/L, resolution concentration: 0.01mg/L; Absorbance: 0.001ABS, microcontroller technology, multi-point calibrating, Data storage, waterproof and dustproof.

CD10, Intelligent Operating system, with timing measurement, parameter setting, data locking, Automatic calibration and other functions. Strong data management function, maximum data storage: 3000 groups.

Measurement method of permanganate index, acid potassiumhy permanganate oxidation (Colorimetry), light source wavelength 540nm, Measurement range 0.000~10.00mg/L, error of indication +/- 5% FS, Repeatability ≤ 2.0%.