STIP-scan

Detect the total chromium content, the range is 0.01mg/L-5mg/L (measured in sections), the digestion is 30min in a Water Bath at 125 ℃, and the detection time is 45-55 minutes. The digestion Colorimetric integrated detection is used, which conforms to the GB7466-87 standard.

Detect the content of copper ions, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Bicyclohexanone Oxalyl Dihydrazone Method".

Simultaneously detect COD, ammonia nitrogen, total phosphorus, turbidity parameters, standard digestion instrument and pipette gun, digestion Colorimetric integrated tube detection, Sensitivity up to 0.001mg/L, with power-off protection function.

Detect the sulfide content, the range is 0.01mg/L-4mg/L (measured in sections), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the GB/T16489-96 standard.

Detect the fluoride content, the range is 0.02mg/L-10mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ488-2009 standard.

Detect the content of silica, the range is 0.1mg/L-5mg/L (segmented measurement), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Silicon Molybdenum Blue Colorimetry" standard.

Detect the nitrite content, the range is 0.002mg/L-1mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the GB7493-87 standard.

Detection of zinc content, the range is 0.05mg/L-15mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Xylenol Orange Spectrophotometric method, spec-trophotometry" standard.

Detect the content of phosphoric acid salt, the range is 0.02mg/L-20mg/L (segmented determination), without digestion, using digestion Colorimetric integrated detection, in line with HJ 670-2013 standard.

Detect Total nitrogen content, range 0.5-100mg/L, use persulfate oxidation method, built-in thermal printer, use digestion Colorimetric integrated tube, standard detection program Total nitrogen L and Total nitrogen H.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Simultaneously detect COD, ammonia nitrogen parameters, digestion Colorimetric integrated detection, with Pipette and digestion instrument, imported cold Light source, can choose standard measurement or Continuous Measurement mode.

Detect the content of volatile phenols, the range is 0.1mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the HJ503-2009 standard.

Detection of nickel content, the range is 0.1mg/L-4mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11910-89 standard.

Digestion Colorimetric integrated tube detection, detection of COD concentration value, range 5mg/L-10000mg/L (segmented), Sensitivity up to 0.001mg/L, with digestion instrument and pipette gun.

Detection of nitrate nitrogen content, the range is 0.5mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Water Quality, Chromotropic Acid Spectrophotometry".