Tensile Machine

Capacity selection 1T, force resolution 1/300000, Control system uses full digital control Frequency AC motor, speed accuracy can be controlled within +/- 0.5%, Test speed range 1~ 500mm/min.

Touch LCD, adopt high-precision system, with digital display of test force, which can realize the adjustment of the speed of the beam when the sample is clamped. The test force Precision is better than +/- 1%, and the test stroke is 600mm.

Imported servo motor to ensure smooth transmission, speed accuracy +/- 0.5%, can be stretched, compression and other tests, data collection Frequency up to 6000HZ.

Capacity selection 500kg, force measurement Precision +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S, deformation indication Precision +/- 0.5%, Test speed range 50~300mm/min (can be arbitrarily set), test maximum stroke effective 500mm, effective Test space left and right 380mm, front and rear < unk >

Equipped with a computer, it integrates measurement, control, calculation and storage functions. It has the function of automatically calculating stress, elongation, tensile strength and elasticity modulus, and the load is not greater than 20T.

The test force range is 0~2000N, the stroke is 800mm, the touch LCD, the measurement range is 2%~ 100% of the maximum test force, the accuracy is better than the indication +/- 1%, and the tensile strength test can be realized.

Range 100N; 10Kg, load Graduation 0.01N; 0.001Kg; 0.01lb, deformation resolution 0.001mm, unit force value units: gf, Kgf, N, KN, tf, Lbf; Displacement units: mm, cm and in, Frequency 50HZ, force value error of in dication ≤ +/- 0.5%, stroke 170mm, Test space 260mm.

Stroke 600mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force Precision is better than +/- 1%, test force 1000N.

Touch LCD, using high-precision system, with digital display of test force, can realize the adjustment of the speed of the beam when the sample is clamped, the test force accuracy is better than +/- 1%, and the test stroke is 1000mm.

Capacity 200Kg, Load analysis 1/10000, Precision < 0.5%, Support a variety of force unit conversion, Suitable for a variety of material testing needs.

Force value digital LCD display, can distinguish tension or pressure, LCD interface is clear and easy to read, three Measurement Units: N, Kgf, Lbf optional and automatically interchangeable, travel limit and overload stop function.

Force measurement range of 100kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Range 10KN; 1000KG, load Graduation 0.1 N 0.01kg 0.01lb, deformation resolution 0.001mm.

Range 300N, load Graduation 0.01N, 7-inch touch screen, high-precision, high resolution, high Stability, four test modes, with its own micro printer.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. Touch key operation, LCD real-time display, support force value and displacement Linear dispersion analysis. With high-precision closed-loop control, overload protection, peak hold and other functions, speed range 1-500mm/min

Range 100N, load Graduation 0.001N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. Touch key operation, LCD real-time display, with closed-loop control, peak hold, overload protection and other functions. Support 1-500mm/min speed regulation

Plastic film, composite film and other materials tensile, disbonding, heat sealing, tearing and other performance test design, with touch key operation and real-time LCD display. It supports stepless speed regulation (1-500mm/min)

Range 1000N, load Graduation 0.01N, 7-inch touch screen, high-precision, high resolution, high Stability, in line with JB/T7796-2017 standard, with its own micro printer.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic films, composite films and other materials. Touch key operation, LCD real-time display, support for multiple test modes and Linear dispersion analysis. With closed-loop control, peak hold, overload protection functions, speed range 1-500mm/min

Range 50KN; 5000KG, load Graduation 0.1 N 0.01kg 0.01lb, deformation resolution 0.001mm.