Tensile Machine

Using high-precision, non-clearance ball screw and timing belt as the guarantee of transmission system accuracy, fully computerized data collection and motion control, force measurement accuracy of 0.5 level, 1/300000 force value resolution.

Force range of 10kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Capacity 5T, force measurement accuracy +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S., can be used to test tensile, compression, bending, shearing, disbonding, tearing and other mechanical properties.

Force measuring range of 50kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

Measurement accuracy +/- 1%, resolution 1/200000, can be used for tensile strength, peeling strength, deformation rate, breaking force, disbonding force, opening force and other performance tests.

The pointer push-pull force meter is used to display the force value with the pointer scale and then observe and read it. The force value measurement range is 10~500N, and the effective stroke is 350mm.

Adopt full digital control AC motor, speed accuracy +/- 0.5%, effective force range 1~ 100% FS, support tensile, compressive and other test modes, strong structural rigidity and stable and reliable operation.

Capacity selection 1T, force resolution 1/300000, Control system uses full digital control Frequency AC motor, speed accuracy can be controlled within +/- 0.5%, Test speed range 1~ 500mm/min.

Force value digital LCD display, can distinguish tension or pressure, LCD interface is clear and easy to read, three Measurement Units: N, Kgf, Lbf optional and automatically interchangeable, travel limit and overload stop function.

Force measurement range of 100kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Force range of 200kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

High matching, can measure tensile rate, disbonding force, tensile strength, opening force, etc., with Measurement certificate, +/- 1% accuracy, 1/200000 resolution.

Force range of 20kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

Control system adopts full digital control Frequency AC motor to ensure high transmission efficiency, smooth transmission, low noise, speed accuracy can be controlled within +/- 0.5%, the product performance is stable and reliable, Measuring accuracy is high, testing software is powerful, easy to understand.

Tension gauge 30kg, in line with 16CFR, 1500.51-53, ASTM WK4510 PS79-96, ASTMF963, EN71-Part, M & S P115A standards, can detect clothing, toys and footwear after the installation of Accessories adhesion strength, loosening caused sharp edge, sharp angle and other mechanical damage.

Capacity selection 500kg, force value Precision < +/- 0.5%, display touch screen (with printing), force value unit Kg, lb, N, data sampling Frequency 200times/sec, force value resolution maximum load 1/+/- 25000 yards, inside and outside without division, and the whole resolution unchanged, load Sensors basic configuration: pull, pressure Sensors (maximum load), effective test width 150mm.

Microcomputer closed-loop control, Precision of force measurement up to +/- 0.5%, Test speed range of 50-300mm/min can be arbitrarily set. With a wide range of loading speed and force measurement, high control accuracy of load and displacement measurement, reliable sample clamping without slipping.