Gas detector

Conventional, optional PID high performance with 0-50ppm high-precision detection range, resolution up to 0.01ppm, low power MCU chip and modular design, remote data monitoring and alarm.

Electrochemistry principle, pump suction sampling, detection of sulfur dioxide gas, range 0~10ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

PH3, range 0~5ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Detect chlorine concentration, range 0-10PPM, using imported Sensors, 2.4-inch industrial-grade color screen, sound and light alarm, can set real-time detection, timing detection.

Electrochemistry principle, pump suction sampling, detection of combustible gas, range 0~5ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Measurement range: PM2.5 dust particles 0~999ug/m3; PM10 dust particles 0~999ug/m3; TVCO organic volatiles 0~5.00mg/m3; C6H6 benzene 0~3.00mg/m3, can achieve 24 hours uninterrupted recording and analysis of environment air mass conditions; provide real-time, periodic data.

Adjustable sensitivity to detect halogen gas leaks of less than 0.5 oz/year. Fast Response and warm-up period of less than 90 seconds ensure efficient detection. It is equipped with a 1200mAh lithium battery that provides 5 hours of continuous operation and supports charging function.

Electrochemistry Sensors principle, detection of gas CL2, diffusion sampling, two-stage concentration alarm, flameproof design is suitable for dangerous conditions 1 and 2, and the range is 0~50ppm.

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, low power MCU chip and intelligent Sensors technology, equipped with high definition LCDTFT display, support Chinese and English Operating interface switching.