Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$133.00
SE
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
7、111、1.5、2、3mm
Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.
$172.00
SE
JINGKELIAN SISI adhesion board, suitable for measuring the surface paint film of plastic and wood furniture
11 teeth1mm、1.5mm、2mm、3mm
SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.
$145.00
SE
TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth
11 teeth1.5mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 1.5mm, 11 teeth, and a single working face.
$145.00
SE
TRUIT TR 5006/1.5 adhesion cross-cut plate cross-cut number 11
111.5mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1.5mm, with 600 type tape and nylon brush.
$326.00
SE
TQC SP3000 Adhesion Tester Cross-cut Guide Gauge/Baige Plate 6-in-1 Multifunctional Adhesion Tester
6 teeth/11 teeth1mm、1.5mm、2mm、3mm
6 teeth/11 teeth, knife tooth spacing 1mm, 1.5mm, 2mm, 3mm, instrument material stainless steel, application standard ISO 2409:2003, ASTM D3359
$912.00
SE
Netherlands TQC VF1847 Cross Hatch Cutter Set CC1000 Series Cross Hatch Cutter
11 teeth1.5mm50~125μm
The number of teeth is 11 teeth, the spacing between teeth is 1.5mm, the instrument material is vacuum hardened stainless steel, aluminum, rubber, the application standard ASTM D3359-2009, suitable for film thickness environment 50~ 125μm.
$773.00
SE
Dutch TQC VF1861 cross-cut cutter head for CC1000 series Cross Hatch Cutter
6 teeth1.5mm50~125μm
Cross-cut cutter head 1,5mm ASTM for CC1000
$361.00
SE
TQC SP1706 cross-cut cutter head 11 teeth, spacing 1.5mm for CC2000/CC3000 series
11 teeth1.5mm121~250µm
If you don't know how to choose "Cross-Cut Tester", please consult customer service.