Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$134.00
SE
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
7、111、1.5、2、3mm
Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.
$173.00
SE
JINGKELIAN SISI adhesion board, suitable for measuring the surface paint film of plastic and wood furniture
11 teeth1mm、1.5mm、2mm、3mm
SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.
$146.00
SE
TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth
11 teeth1.5mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 1.5mm, 11 teeth, and a single working face.
$146.00
SE
TRUIT TR 5006/1.5 adhesion cross-cut plate cross-cut number 11
111.5mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1.5mm, with 600 type tape and nylon brush.
$8842.00
SE
HUITAO HT-430P electric cross-cut tester, desktop PLC control automatic cross-cut adhesion testing
Adopt PLC control and touch screen operation, support a variety of cross marking modes (such as 6 × 1, 11 × 2) and 0-1000mm/min speed adjustment, with automatic clamping and 90 degree swirl/spin function, suitable for accurate testing of different Film thickness samples.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.