CHINA NBC-1021-2 Touch screen single column Tensile Strength Tester 500KG
Capacity selection 500kg, force value Precision < +/- 0.5%, display touch screen (with printing), force value unit Kg, lb, N, data sampling Frequency 200times/sec, force value resolution maximum load 1/+/- 25000 yards, inside and outside without division, and the whole resolution unchanged, load Sensors basic configuration: pull, pressure Sensors (maximum load), effective test width 150mm.
Factory
NBC-1021-2(500KG)
-
CHINA NBC-1021 Touch screen single column Tensile Strength Tester 20KG
$ 1151.00 -
Lugong STX1000 Digital Display Single Arm Tensile Tester Single column tensile machine 1000N
$ 1174.00 -
Hypertherm XY-2T electronic universal testing machine, range 20KN/2000KG
$ 2757.00 -
Taichang TC-DLJ01 Microcomputer Tensile Tester 1000mm stroke, imported Sensors
$ 1283.00 -
Hypertherm LY-1T electronic universal testing machine, range 10KN/1000KG
$ 2849.00
Introduction
It is used for the mechanical properties test of rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics and other non-metallic materials and metal wires, metal foils, metal plates and metal rods.
The results of 10 test reference points can be stored, their average values can be automatically calculated, and the maximum value and force value at break can be automatically captured.
The machine includes a thermal printer, which can be automatically outputTestOutcome. (Optional)
This machine has simple structure and easy operation, and can be directly placed on the studio floor for testing. It is especially suitable for testing instruments used in the production line to control product quality.
Factory NBC-1021-2(500KG) Tensile Strength TesterSpecifications
| LIST | VALUE |
|---|---|
| Capacity selection | 500kg |
| Force Precision | <±0.5％ |
| display | Touch screen (with printing) |
| Force unit | Kg、lb、N |
| Frequency of data sampling | 200times/sec |
| force resolution | Maximum load 1/+/- 25000 yards, no gears inside and outside, and the whole process resolution remains unchanged |
| Load Sensors | Basic Configuration: Pull and Pressure Sensors (Maximum Load) |
| effective test width | 150mm |
| Efficient stretching of space | 1200Mm (850mm with forceps) |
| Test speed range | 100~500mm/min |
| Displacement error of indication | ±0.5％ |
| Breakpoint Ratio Settings | 0~99%, users can set the appropriate break downtime according to different materials |
| Test bench Safety Devices | Up and down stroke limiting device |
| Overload protection | Exceeding the maximum load by 10%, the machine is automatically protected |
| Fixture configuration | A set of stretching fixtures |
| Dimension | 550*400*1820mm |
| Host Weight | About 100Kg |
| Power supply Voltage | 220V/50Hz |
Factory NBC-1021-2(500KG) Tensile Strength Tester Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
