Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$182.00
SE
PUSHEN HGQ 2mm single-edged paint film cross-cut instrument, standard with 2 2mm single-edged cutter heads, 11 teeth
11 teeth2mm
2Mm cutter tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$371.00
SE
TQC SP1702 cross-cut cutter head 6 teeth, pitch 1mm for CC2000/CC3000 series
6 teeth1mm0 to 60 µm (solid substrate)
6 teeth, 1mm cutter teeth; high-grade wear-resistant stainless steel material; meets ISO/DIN2409 standards.
$926.00
SE
Netherlands TQC VF1847 Cross Hatch Cutter Set CC1000 Series Cross Hatch Cutter
11 teeth1.5mm50~125μm
The number of teeth is 11 teeth, the spacing between teeth is 1.5mm, the instrument material is vacuum hardened stainless steel, aluminum, rubber, the application standard ASTM D3359-2009, suitable for film thickness environment 50~ 125μm.
$182.00
SE
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
11 teeth1mm
1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00
SE
QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads
6 teeth1mm、2mm、3mm
The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.
$182.00
SE
Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method
11 teeth1mm、2mm
1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$840.00
SE
TQC VF2357 cross-cut blade 6 teeth 2mm for CC1000 series
6 teeth2mm0~60µm (soft substrate)
$182.00
SE
PUSHEN HGQ 2 * 5 multi-edge cross-cut Tester number of teeth 6 teeth, spacing 2mm
6 teeth2mm60~120μm
$842.00
SE
TQC VF2358 cross-cut blade 6 teeth 3mm for CC1000 series
6 teeth3mm0 to 60 µm (solid substrate)
$837.00
SE
Dutch TQC VF1861 cross-cut cutter head for CC1000 series Cross Hatch Cutter
6 teeth1.5mm50~125μm
Cross-cut cutter head 1,5mm ASTM for CC1000
$842.00
SE
TQC VF2355 cross-cut blade 6 teeth 1mm for CC1000 series
6 teeth1mm0 to 60 µm (solid substrate)
$182.00
SE
Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm
6 teeth1mm0 to 60 µm (solid substrate)
1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$847.00
SE
TQC VF2359 cross-cut blade 11 teeth 1mm for CC1000 series
11 teeth1mm0~60µm (soft substrate)
Multi-blade, number of teeth 11, spacing 1mm; sharp wear-resistant stainless steel material; meets ASTM3359 standard; for soft substrates within 60μm.
$132.00
SE
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
6 teeth1mm、2mm
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$182.00
SE
PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm
11 teeth2mm60~120μm
2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.
$182.00
SE
PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm
6 teeth3mmSuitable for hard substrate samples larger than 120 μm
3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.
$182.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$387.00
SE
TQC SP1706 cross-cut cutter head 11 teeth, spacing 1.5mm for CC2000/CC3000 series
11 teeth1.5mm121~250µm
Login
MODERNER 2mm × 5 single edge cross-cutting cutter head 2mm pitch 6 teeth
6 teeth2mm60～100μm
$8912.00
SE
HUITAO HT-430P electric cross-cut tester, desktop PLC control automatic cross-cut adhesion testing
Adopt PLC control and touch screen operation, support a variety of cross marking modes (such as 6 × 1, 11 × 2) and 0-1000mm/min speed adjustment, with automatic clamping and 90 degree swirl/spin function, suitable for accurate testing of different Film thickness samples.
$5755.00
SE
HUITAO HT-110 hundred grid method scratch tester, scratch resistance test of automotive plastic interior and exterior trims
The device uses metal scraping needle to cross scribe with 5-15N force, which can measure the color difference before and after scraping. It has two scribing speed and length combinations, nine predetermined cross scribing modes and free program control, and has a wide clamping range and convenient operation.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.