STIP-scan

Simultaneously detect COD, ammonia nitrogen parameters, digestion Colorimetric integrated detection, with Pipette and digestion instrument, imported cold Light source, can choose standard measurement or Continuous Measurement mode.

The HI98195/40 multiparameter Water Quality Analyzer is equipped with a 40-meter electrode for extremely deep water monitoring. With IP67 waterproof performance, it can comprehensively measure pH, conductivity, TDS and other 10 water quality indicators. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term and large-scale water quality monitoring in the most severe environments.

Residual chlorine measurement range: 0.00 to 5.00mg/L (asCl2), resolution: 0.01mg/L, accuracy: +/- 0.03mg/L +/- 3% of reading, total chlorine measurement range 0.00 to 5.00mg/L (asCl2), built-in reaction Timer to ensure consistent results between sample measurements and users.

Reagent name Manganese, range 0.0~20.0 mg/L (as Mn), the number of times 100.

DO10 portable polarographic Dissolved Oxygen Meter, support temperature automatic compensation, pressure automatic compensation, salinity manual compensation, support full oxygen calibration, zero oxygen calibration.

Gas sensing electrode filling solution, capacity 480 ml

Measurement range 0.0 to 20.0 mg/L (e.g. Cl -), resolution 0.1 mg/L, accuracy @25 ℃： +/- +/- 6% of reading at 25 ℃, widely used in water treatment, environment monitoring, industrial production and other fields.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, Mn Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, commonly used in environment monitoring, wastewater treatment, drinking water mass detection and other fields.

Measurement range 0.00-20 mg/L, resolution 0.01mg/L, accuracy @25 ℃: +/- 3 %； +/- 0.5mg/L of reading, commonly used in drinking water monitoring, industrial production process control and other fields to ensure that the concentration of fluoride ions in water is within the safe range.

Measurement range 0.00 to 3.50 mg/L (as SDBS), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.04 mg/L +/- 3% of reading, widely used in water treatment, environment monitoring, detergent production and detergent residue detection.

PH measurement range 0.00 to 14.00 pH, EC measurement range 0.00 to 20.00 mS/cm, TD measurement range S0.00 to 10.00 ppt (g/L), automatic temperature compensation, waterproof design, stable reading, BEPS low battery error prevention system to avoid wrong measurement.

Digestion Colorimetric integrated tube detection, detection of COD concentration value, range 5mg/L-10000mg/L (segmented), Sensitivity up to 0.001mg/L, with digestion instrument and pipette gun.

Measurement range 0 to 300% oxygen saturation, Operating temperature range 0 to 50 ℃, integrated temperature sensor and easily replaceable PTFE membrane cover, the ability to transfer information allows hot swapping of the probe without recalibrating.

The HI98195/20 multiparameter Water Quality Analyzer is equipped with a 20-meter electrode, suitable for deep water and long-distance monitoring. With IP67 waterproof design, it can accurately measure 10 water quality parameters such as pH, conductivity, TDS, etc. Support 45,000 Data storage, USB data transmission and GLP management to meet the needs of multi-scene applications, suitable for long-term monitoring.

Dissolved oxygen range of 0.00~45.00mg/L, with manual, manual continuous and time interval three Data storage mode, support automatic temperature compensation.

HI98302 High performance TDS instrument, Wide Measurement range, Automatic calibration, Unique electrode design, Easy operation and suitable for many industries.

Measurement range 0.0 to 19.9 mg/L (ppm), resolution 0.1mg/L (ppm), Measurement accuracy +/- 1.5% F.S., suitable for the determination of different water quality and wastewater dissolved oxygen in various industries.

Measurement range: -2.000 to 20.000 pH, ORP/mV: +/-2000.0 mV, ISE: 1.00 x 10-6 to 9.99 x 1010 Ion concentration units, linear and non-linear temperature compensation, choice of three salinity measurement ranges, up to four point EC calibrated and single point salinity calibrated.

Residual chlorine Measurement range 0.00 to 5.00 mg/L (as Cl2), resolution 0.01 mg/L, total chlorine Measurement range 0to 500 mg/L (as Cl2), resolution 1 mg/L, using innovative Optical inspection system design, with good accuracy.

Calcium hardness measurement range 0.00 to 2.70 mg/L (as CaCO3), resolution 0.01 mg/L, high quality Optical inspection filter, unique reference Detector to ensure measurement accuracy and accuracy.

Laboratory, hanging and portable three use modes, ultra-thin and lightweight Appearance design, 5.5-inch large-screen LCD display, touch key operation, unique data type intelligent electrode, automatic identification, fault diagnosis.

Configure HI763100 conductivity dedicated electrode, support manual, manual continuous and time interval three storage modes, with automatic temperature compensation.

Measurement range 0 to 300 μg/L (as Cr (VI)), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 4% of reading, commonly used in industrial wastewater treatment, environment monitoring and water quality control.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.01 mg/L +/- 8% of reading, commonly used in environment monitoring, water quality control, industrial process control and other fields to ensure that the iron concentration in water is within the safe range and meets the requirements of relevant standards and regulations.