STIP-scan

Made of durable ABS plastic with a high density polyethylene (PE) (HDPE) oxygen permeable membrane, each lid is easily filled with electrolysis and mounted on the probe, the membrane separates the probe cathode and anode from the tested water.

PCD100T, conductivity module: 1 point calibrated, reference temperature: 18 ℃, 20 ℃, 25 ℃ optional, support electrode calibration, standard solution calibration, standard series: CH, Europe and the United States optional, measurement can be switched to TDS/salinity/resistivity.

Measurement range 0 to 300%, Operating temperature range 0 to 50 ℃, Built-in microchip with platinum cathode with silver/silver chloride anode, integrated temperature sensor and easily replaceable PTFE membrane cover.

Electrode shell plastic shell, cable length 1 meter, electrode interface BNC, reference solution 3mol KCl gel - non-additive, specification φ 12mm × 120mm, Measurement range Platinum needle, +/- 1999mV

Measurement range residual chlorine/total chlorine: 0.00~3.00mg/L, resolution concentration: 0.01mg/L; Absorbance: 0.001ABS, microcontroller technology, multi-point calibrating, Data storage, waterproof and dustproof.

Reagent name High concentration nitrite, range 0~150 mg/L (as NO2-), the number of times 100.

DOPRO10 Portable Optical inspection Dissolved Oxygen Meter, measurement does not consume dissolved oxygen, stable measurement, supporting stainless steel protective sedimentation sleeve, POM shell, durable.

PCD10, conductivity module: 1 point calibrate, automatically identify calibrated solution, support electrode calibration, standard solution calibration, can be switched to TDS/salinity/resistivity, reference temperature can be set according to the sample solution.

40 meters of wire, IP67 waterproof and anti-skid body and IP68 waterproof electrode, support up to seven water quality indicators of rapid simultaneous measurement, can install pH (ORP), EC electrode

The HI98195/10 multiparameter Water Quality Analyzer is equipped with a 10-meter electrode, suitable for deep water quality monitoring. With IP67 waterproof performance, it can quickly measure 10 water quality indicators such as pH, ORP, conductivity, etc. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term data collection and analysis in complex wild environments.

PO10, rechargeable lithium battery power supply, support low power management function and power failure protection function, charging Interface standard: Type-C, easy to use, in line with European Union standards.

PD100, PH module: automatic identification of calibrating solution, calibrating point: 1~ 3 point Automatic calibration, CH, USA, NIST calibrating solution optional, support pure water compensation and ammonia compensation mode.

Electrode shell polyformaldehyde (POM), cable length 2 meters, built-in temperature 10KΩ, electrode interface BNC (Q9)/BNC (Q6), reference solution can be added, specification φ 12mm × 120mm, Measurement range 0~20mg/L, 0~200% saturation

pH resolution 0.1/0, pH Accuracy +/- 0.01pH +/- 1 word, ORP resolution 0.1, ORP Accuracy +/- 0.1% F. S +/- 1 word, conductivity level 1.0, conductivity Measurement range 0~19.99mS/cm, automatic segmentation, Temperature Measurement accuracy +/- 0.2 ° C.

Multiparameter water quality measurement, designed for field measurements in harsh environments. The instrument supports simultaneous measurement of pH, ORP, dissolved oxygen, atmospheric pressure and temperature five key water quality indicators, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, ensuring Reliability in complex environments such as pipelines or deep wells.

CD10, Intelligent Operating system, with timing measurement, parameter setting, data locking, Automatic calibration and other functions. Strong data management function, maximum data storage: 3000 groups.

Electrode shell stainless steel, cable length 1 meter, built-in temperature 10KΩ, electrode interface BNC (Q6), reference solution -, specification φ 5mm × 120mm, Measurement range 0-110 ℃

Electrode shell polyformaldehyde (POM), cable length 2 meters, built-in temperature 10KΩ, electrode interface 8 cores, reference solution can be added, specification φ 12mm × 120mm, Measurement range 0~20mg/L, 0~200% saturation