STIP-scan

Measurement range: PH 2.00 - 16.00pH, ORP 699.9mV, +/-1999mV, built-in three calibrated points, automatic recognition of one or two points calibrated, easy to operate and economical.

Measurement range - dissolved oxygen 0.00 to 45.00 ppm (mg/L); 0.0 to 300.0% saturation, resolution - dissolved oxygen 0.01 ppm (mg/L); 0.1% saturation, the instrument has the function of automatically identifying electrodes, sensor type, calibrated data, factory number and other electrode parameters.

Detect the cyanide content, the range is 0.004mg/L-1mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ484-2009 standard.

Measurement range 0.00 to 2.00 mg/L (as ClO2), resolution 0.01 mg/L, accuracy @25 ℃ reading +/- 0.10 mg/L +/- 5%, high quality Optical inspection filter, High measurement Stability and less wavelength error ensure Measurement accuracy and accuracy.

Detect the concentration value of suspended solids, the range is 5mg/L-500mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the imported cold Light source conforms to the "National Standard Weight Method" standard.

Detect the total chromium content, the range is 0.01mg/L-5mg/L (measured in sections), the digestion is 30min in a Water Bath at 125 ℃, and the detection time is 45-55 minutes. The digestion Colorimetric integrated detection is used, which conforms to the GB7466-87 standard.

Detect the sulfide content, the range is 0.01mg/L-4mg/L (measured in sections), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the GB/T16489-96 standard.

Dedicated dissolved oxygen screw cap membrane made of durable ABS plastic with PTFE oxygen permeable membrane. Each lid is easily filled with electrolysis and mounted on the probe.

Detect the content of copper ions, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Bicyclohexanone Oxalyl Dihydrazone Method".

Reagent name Copper, range 0.00 to 5.00 mg/L (as Cu), 100 times.

At the same time, the content of COD, Total phosphorus, turbidity and suspended solids (SS) in the water was detected, which met the standards. The built-in thermal printer was used, and the digestion Colorimetric integrated tube Colorimetric was used.

Reagent name Low concentration nitrite, range 0~600μg/L (as NO2-N), the number of times 100.

Dissolved oxygen measurement range 0.0 to 50.0mg/L (ppm), automatic temperature compensation (ATC), height, salinity automatic compensation, waterproof design, custom design, unique dissolved oxygen probe, suitable for aquaculture industry.

Simultaneously detect COD, ammonia nitrogen, total phosphorus, turbidity parameters, standard digestion instrument and pipette gun, digestion Colorimetric integrated tube detection, Sensitivity up to 0.001mg/L, with power-off protection function.

Operating temperature range 0 to 50 ℃, fast calibrating, Measured value for temperature compensation, sensitive PTFE membrane can be replaced in seconds, ideal for field use.

Measurement range 0-10mg/L, resolution 0.1mg/L, sexual repeability ≤ 2%, error of indication +/- 5% FS, suitable for indoor and outdoor swimming pool water quality testing and various water plants, in order to control the water urea to meet the specified water quality standards.

Detect the content of silica, the range is 0.1mg/L-5mg/L (segmented measurement), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Silicon Molybdenum Blue Colorimetry" standard.

Reagent name Nitrate, range 0.0~30.0 mg/L (as NO3--N), 100 times.

Detect the fluoride content, the range is 0.02mg/L-10mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ488-2009 standard.

General TDS standard solution, TDS value 744.7 ppm, capacity 480 ml

The HI3148B features a Glass body, an open connection using CPS technology, and can be refilled with 3.5 M potassium chloride.

PC100 desktop pH, Conductivity Meter, conductivity module: 1 point calibrated, reference temperature: 18 ℃, 20 ℃, 25 ℃ optional, support electrode calibration, standard solution calibration, standard series: CH, Europe and the United States optional, measurement can be switched to TDS/salinity/resistivity.

Detection of zinc content, the range is 0.05mg/L-15mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Xylenol Orange Spectrophotometric method, spec-trophotometry" standard.

Reagent name High concentration ammonia nitrogen, range 0.0~100.0 mg/L (as NH3 +), 100 times.