Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$130.00
SE
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
6 teeth1mm、2mm
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$179.00
SE
PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm
11 teeth2mm60~120μm
2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm
6 teeth3mmSuitable for hard substrate samples larger than 120 μm
3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
Login
MODERNER 2mm × 5 single edge cross-cutting cutter head 2mm pitch 6 teeth
6 teeth2mm60～100μm
If you don't know how to choose "Cross-Cut Tester", please consult customer service.